Knife Sharpening
Stones, Gesswein® General Purpose Stones, Aluminum Oxide
Availability
To order
The most recognizable brand in the world is
Gesswein. An excellent all-round stone. In combination with oil, this stone cuts
quickly
and holds its shape well. Suitable for use on both EDM and machined surfaces. All tool
steels of any hardness such as A2, D2, M2, S7 and
H13.
Supreme Green Stoning Oil
Oil
To order
This is an oil for processing stones during
sharpening. It is economical, virtually odorless and environmentally safer to use than
alternative stone oils. Use with finishing stones to prevent stress and keep the work
surface clean. Allows the stone to cut better and more freely, creating a bright and
smooth surface. Eliminates the need for dangerous kerosene and other lubricants that
can harm your health. Can also be used with diamond tools where lubrication is
recommended.
Viscosity: 38/45 Price per 100
ml
Elbor bars for sharpening of
knives of 200/125 mm, 125/100 mm и 150х25х3 mm
To order
Monolayer bars (continuous layer), 100%
concentration of elbor powder with a uniform distribution throughout the volume.
Copper-tin bundle. The amount of powder in one bar (carat) is 50 carats.
Elbor blocks are not wetted with water, we recommend to drop a few drops of vegetable
oil before use, after work you can rinse with water.
Sharpening paste
To order
Sharpening paste, helps to remove burrs formed during sharpening and to polish the
cutting edge when working with leather tape.
Wight: +- 400
grams.
Sharpening stones BORIDE
(USA) Т2 series
Availability
To order
It is a solid grindstone made of alumina on a ceramic bond, cuts very quickly and at
the same time provides a silky smooth surface. Even the most conservative
"professional" will love T2. Ideal for machining high-alloy stainless and tool steels.
The best series for sharpeners and knife cutters. Must be used with water or
oil.
Diamond whetstones for sharpening knives
To order
Diamond whetstones for sharpening knives on a galvanic bond, made in China. Size 160x20x9 mm.
We offer a set of six bars (grit):
120 – 200 – 400 – 800 – 1600 – 3000 grit
We also recommend purchasing an organizer for storing bars (roll-up bag) 600 uah/pc
Sharpening stones BORIDE
(USA) PC series
Availability
To order
Special polishing stone Premium aluminum oxide
Soft
structure with moderate to fast degradation. Finishing stone PC (Polisher's Choice) is
made of selected premium grade aluminum oxide grains, premium bond. Designed for fast
machining of tool steel, stainless steel and non-ferrous metals. Designed for use as a
finishing stone for a cutting edge to create a mirror-like cutting edge effect.
The most recognizable brand in the world is
Gesswein. Premium stones of the Moldmaker series; This green silicon carbide abrasive
is
the hardest of our abrasive grains. Gives a silky-matt finish to any pre-hardened tool
steel. All casting and tool steels of any hardness, such as A2, D2, S7, H13, P20,
420SS,
as well as soft non-ferrous metals such as aluminum and beryllium.
Knife Sharpening
Stones, Gesswein®, Ruby Rough Out Stone, Aluminum Oxide
Availability
To order
The most recognizable brand in the world is
Gesswein. Made from coarse ruby aluminum oxide with a high chromium content. This very
loose grain with sharp edges is ideal for fast cutting and metal removal Good choice
for
roughing large molds and dies surfaces All tool steels of any hardness such as A2, D2,
M2,
S7, H13, and soft non-ferrous metals such as aluminum and
beryllium.
We offer a set of diamond (SD) and CBN whetstones (CBN) for sharpening knives
12 000
₴
To order
Diamond whetstones for sharpening knives on a copper-tin bond, made in Ukraine (Shark). Size 165x25x6 mm with blank (diamond layer thickness 3 mm).
We offer a set of eight whetstones:
Diamond whetstones for shaping the cutting edge 160/125 and 125/100
Sharpening 63/50 and 28/14
CBN whetstones for Polishing or finishing 14/10, 7/5, 3/2, 2/1
We also recommend purchasing an organizer for storing bars (roll-up bag) 600 uah/pc
Diamond bars (SD) for sharpening knives
1200
uah/pc
To order
Diamond whetstones for sharpening knives on a copper-tin bond, made in Ukraine (Shark). Size 165x25x6 mm with blank (diamond layer thickness 3 mm).
We offer a set of six bars:
Forming a cutting edge 125/100
Sharpening 63/50 and 28/14
Polishing or finishing 14/10, 7/5, 3/2
We also recommend purchasing an organizer for storing bars (roll-up bag) 600 uah/pc
Эльборовые бруски для заточки
ножей 200/125 мм, 125/100 мм и 150х25х3 мм
To order
Бруски монослойные (сплошной слой), 100%
концентрация порошка
эльбора с равномерным распределением по всему объему. Связка медно-оловянная.
Количество порошка в одном
бруске (каратность) - 50 карат.
Эльборовые бруски не смачиваются водой, рекомендуем перед использованием капнуть
несколько капель
растительного масла, после работы можно промыть водой.
Belt for straightening straight razors
680
₴
To order
Board with leather
600
₴
To order
A board with leather for finishing and straightening cutting edges made of valuable wood.